3Demandic Booking
your local 3D-printing service
GÖTEBORG
This service gives access to a 3D-printer during booked time. After booking you will receive a link on SMS and EMAIL, that let you open the door to the cabinet, and you will have access to the printer during your booket time. The result of the print will in many times be user driven, and even if 3Demandic will do our best to keep the equipment in good condition to maximize the chances of a successful print, this service are not selling 3D-printed objects, just access to a machine capable to make them.
Please be averred of the limitations of the technique, and do the necessary research before use if you don’t know how to use a 3D-printer. You can find a lot of information on google and youtube. A good start is to check out the printers official youtube page or homepage:
https://www.youtube.com/@BambuLab
https://wiki.bambulab.com/en/p1/manual/p1s-quick-start-guide
The 3D-printer is calibrated and ready for use, please do not try to repair it on your own if something is wrong or damaged, instead contact our service by booking a service/reparation case here in the booking or contact us by email.
Happy printing!
*Conditions:
Booking the above service gives access to a technical equipment (3D printer) for as long as booked. The booking only gives access to the technical equipment, but 3Demantic (Raz Design) makes no guarantees about print quality or guarantee that the print will be successful. 3Dmandic (Raz Design), works to ensure that the equipment is in good condition to maximize the chances of a successful print with good results, but 3D printing and its final results are largely dependent on parameters such as how well the print bed is cleaned , which specific settings the user used when preparing the file, as well as the specific geometry chosen to print, orientation, speed, etc. And 3Demandic (Raz Design) thus takes no responsibility for the result, but only delivers access to the 3D printer and necessary material (PLA). The material used for this service is limited to PLA, and the customer may not use their own material or make changes to the machine, such as their own calibrations, etc. To use the service, the customer needs to book as long as the customer’s 3D printing takes, + any preparation time and during this time have free access to the 3D printer to check that the printing is done as it should, etc. It is not allowed to 3D print at an unbooked time, thus not allowed to book a shorter time to start the machine, and then book a short time for collection, but the time booked must correspond to the time the machine is used by the customer. Payment is made in connection with booking through Payson.